• Product
    • Product
    • Supplier
Advanced

EN50155 Multifunction 4G+WiFi Routers

Supplier
LANTECH COMMUNICATIONS GLOBAL, INC
Request for Quotation

1x Wi-Fi 11ac + 1 LTE 4G + 2 serial ports + 6 Gigabit Ethernet

Spec

  • Function : Firewall,QoS,VPN
  • Products Status : Common
  • Type : Wired,Wireless
  • Use : Enterprise

Key Features

Lantech TPWMR-5006 series is a next generation EN50155 multi-function VPN router w/ 1 x 802.3ac Wi-Fi + 1 x LTE modem +6 Gigabit X-coded Ethernet switch incl. 4 PoE ports + 2 serial ports that supports advanced function of VPN, Load-balancing**(Premium pack), EMMC Flash Storage**, TWCC**, Protocol gateway(Modbus), Storage**, Wi-Fi roaming** and LTE dual SIM fail-over for industrial applications. The dual core CPU with 1.6GHz + 256M flash enables the router to multi-task smoothly.

Optional TWCC** (Train Wireless Carriage Coupling) for auto discovery, redundant ring & auto coupling 
TPWMR-5006 supports series supports optional TWCC** (Train Wireless Carriage Coupling) that enables auto wireless coupling to reconnect APs.

LTE design 4G/3G w/2SIMs for redundancy 
With one mobile LTE module (1L model), 2 SIM card slots, TPWMR-5006 provides redundant link between two service providers. Both GPS and Russian GLONASS systems are supported.

Optional EMMC Flash storage**
The optional EMMC flash storage on router can offer 8G/16G/32G capacity.

IEEE 802.11ac one band radio up to 1.3GMbps bandwidth
With IEEE 802.11ac capability, TPWMR-5006 can operate either 5GHz or 2.4GHz bands, offering the maximum speed of 1.3GMbps bandwidth it is also compatible with 802.11g/n that can work with 2.4GHz for longer range transmission.

MIMO technology with 3T3R and standard SMA / optional QMA type connectors
Lantech TPWMR-5006 series adapts MIMO technology with smart antenna transmission and reception for 3T3R. With six external detachable antenna SMA/QMA** connectors and optional antennas, TPWMR-5006 can have better Wi-Fi & LTE/GPS coverage.

Optional 802.11r fast roaming** 
TPWMR-5006 support fast roaming** in coordination with Lantech Wireless Controller to allow encryption keys to be stored on all of the APs in a network. Client mode supports PMK** Caching and pre-authentication.

Wireless WMM QoS 
TPWMR-5006 supports 802.11e standard which defines a set of Quality of Service for wireless LAN applications as well as WMM (WIFI multimedia)

Advanced security & 16 SSIDs
The security support standards including 64/128bits WEP, WPA/WPA2 PSK (TKIP*, AES), 802.1x** ensures the best security and active defense against security treads. Lantech TPWMR-5006 support up to 16 SSIDs, each SSID has its independent security and encryption.

Load Balancing** with 8 mechanism for multi-WANs (premium license)
TPWMR-5006 supports Load Balancing** for LTE/WAN connections. There are eight schemes for Load Balancing** function:

Pack
Algorithm
Description
Standard
Fixed
Manually route by traffic type through fixed WAN link.
Basic Package
Failover
Routes connections through preferred WAN link while others stand-by. Sequentially activate another link if preferred link fail occurs. Once failover will not failback until link loss.
Priority
Routes connections through preferred WAN link as primary while others follow by. Ex. Wi-Fi  client>LTE>others 
Weighted Round-Robin
Evenly distribute the traffic over all working WAN links in circular order according to the specified weights.
Custom Route
Routing through the selected WAN for each specific traffic, ex: TCP/UDP port number and IP address.
Full Package (incl. basic package)
Sticky Session*
Binding all connections in an application session to particular WAN link to ensure all connections in the session are routed to the same WAN link , that is suitable for security services like online payment etc.
Smallest Load*
Routes connections through the WAN link with highest free bandwidth ratio. 
The ratio = 1 - (traffic load / the capability of a WAN link).
The traffic load could be defined by downstream, upstream or total traffic
Fastest*
Routes connections through the WAN link with lowest latency time.

2 port serial connection, Modbus gateway
It builds in 2 port serial connection for RS232; RS422/ 485 in which RS422/485 has 2.5KV isolation protection. The built-in Modbus gateway can convert Modbus RTU/ASCII to Modbus TCP for device control.

VPN and firewall
Besides traditional VPN peer to peer tunneling, TPWMR-5006 support latest Multi-Site VPN function that is an efficient way for mesh tunneling. The registration is under cloud service and encrypted by SSH makes the connection easy and safe. It supports Multi-Site VPN, Open VPN, L2TP, IPsec L2 over GRE, NAT, and PPTP** for various VPN applications.    The built-in Layer-4 firewall includes DoS**, IP address filter / Mac address filter* / TCP/UDP port number.

Optional 2 GT smart bypass protection
The optional bypass relay is set to bypass the router to the next one when power is off in order to protect the network from crashing. Lantech bypass caters to remain in bypass mode until the router is completely booting up when power is back to avoid another network lost. Also it will be activated when detecting the router is hanged or link down.

DIDO for alarm & email** notice; Event log; Remote Web/SMS** control 
2 sets of DIDO function can support additional high/low physical contact for designate applications besides Port / Power events, for example, DIDO function can trigger alarm if the router was moved or stolen. In case of events, the TPWMR-5006 will immediately send email** and trap. The event log can be sent via syslog, emails or trigger the alarm relay. When the router is at remote area with limited access, Web/SMS** control can help to get router status or remotely reboot by Web/SMS**.

Wide range dual input voltage from dual isolated input voltage from 16.8-137.5V (WV model) 
The TPWMR-5006 is able to work from dual 16.8V ~137.5V DC isolated input (WV model) for PoE at/af with PoE budget 60W that is particular good for vehicle, rail train, depot etc applications.

Environmental monitoring for inside router info& alerting; Graphic WIFI & LTE signal strength and TX/RX rate display 
The built-in environmental monitoring can detect router ambient temperature, voltage, current and total PoE load where can send the syslog, email** and SMS** alert when abnormal. The graphic WIFI & LTE signal strength and TX/RX rate display shows connection status at a glance

Built-in Managed Switch Function
Managed switch function is built-in and provides various L2+ functions for network access deployment. It delivers ports and PoE management, VLAN, QoS, multicast, redundant ring, and security functions.

Dual image firmware*
It supports dual-image firmware* to choose which one to start.

Editable login page of captive portal 
The TPWMR-5006 supports editable captive portal function that allows administrator to force end-users redirect to authentication page.

USB port for back up, restore configuration and upgrade firmware*
The built-in USB port can upload/download/upgrade the firmware through USB dongle for router replacement

Ruggedized EN50155 design and FCC*/CE* & E-marking** certificate
The TPWMR-5006 series is verified with EN50155*, EN61373*, EN45545 standard with IP65/54 housing. It passed serious tests under extensive Industrial EMI and environmental vibration and shocks standards. With CE* & FCC* radio certification for LTE and E-marking** certificate, the TPWMR-5006 is best for outdoor community, vehicle, power substation, process control automation etc. For more usage flexibilities, TPWMR-5006 supports operating temperature from -20°C to 70°C or -40°C to 70°C(-E)

*Future Release
**Optional

Last Update : 2019-04-08
LoadingLoading ...


The purpose of Slider Kit is to gather common slideshow-like jQuery functionalities (such as news sliders, photos galleries/sliders, carousels, tabs menus)

When tracking mouse movement, you usually need to know the actual position of the mouse pointer. The event object that is passed to the handler contains some information about the mouse coordinates.

Step 1Fill in the formStep 2Completion

Mr.Greg Tsai , LANTECH COMMUNICATIONS GLOBAL, INC

USD
Insert a template
0/1500

File formats: htm, html, doc, docx, pdf, txt, jpg, gif, png. Max 3 files (10MB in total).

Total size:0

  • +

This helps to more precisely match your inquiry with potential suppliers.Use "," or "enter" to separate multiple keywords.

Please fill in all required fields.

    Recommendations

    Loading ...

    Small Order Recommendation

    Loading ...