• Product
    • Product
    • Supplier
Advanced

EN50155 10G Ethernet Switches

Supplier
LANTECH COMMUNICATIONS GLOBAL, INC
Request for Quotation

Spec

  • Communication Mode : Full-Duplex
  • Function : LACP,POE,QoS,SNMP,VLAN Support
  • Products Status : Stock

Key Features

Lantech TPES-R6616XFT is a high performance L2+ Ethernet switch with 16 10/100T + 4 10G Copper + 2 10G Fiber Q-ODC w/8;16 copper 802.3af/at PoE injectors or w/8 copper PoE plus 2 10GT(total 10 ports) PoE Injectors which provides L2 wire speed and advanced security function for network aggregation deployment. It delivers ITU G.8032 enhanced ring recovery less than 20ms in single ring while also supports enhanced mode with easy configuration. The comprehensive QoS, advanced security including INGRESS/EGRESS ACL L2/L3, TACACS+, SSH/SSL, Mac based DHCP server, DHCP Option 82, DHCP server, IGMPv1/v2/v3/router port are supported and also required in large network. It also supports10K Jumbo frames.

Up to 16 PoE at/af ports w/advanced PoE management, Dual WVI input with max PoE budget
Compliant with 802.3af/at standard, the Lantech TPES-R6616XFT is able to feed each PoE port up to 30 Watt. Lantech TPES-R6616XFT supports advanced PoE management including PoE detection and scheduling. PoE detection can detect if the connected PD hangs then restart the PD; PoE scheduling is to allow pre-set power feeding schedule upon routine time table. Each PoE port can be enabled/disabled, get the voltage, current, Watt, and temperature info displayed on WebUI. WVI model accept 16.8~137.5VDC dual isolated input with galvanic protection and can feed 54V output for PoE feeding with 80W budget.

Miss-wiring avoidance, node failure protection, Loop protection
The TPES-R6616XFT also embedded several features for strong and reliable network protection in an easy and intuitive way. When the pre-set ring configuration failed or looped by miss-wiring, Lantech TPES-R6616XFT is able to alert with the LED indicator and disable ring automatically. Node failure protection ensures the switches in a ring to survive after power breakout is back. The status can be shown in NMS when each switch is back. Loop protection is also available to prevent the generation of broadcast storm when a dumb switch is inserted in a closed loop connection.

Support PXE to boot up switch with latest or certain firmware
It supports PXE protocol that can boot up switch with latest or certain firmware obtaining from the server and act as DHCP option 82 or Port based DHCP function to offer the same IP addresses on port base to devices.

DHCP option 82 & Port based, Mac based DHCP, Option66, IPv6 DHCP server**
DHCP server can assign dedicated IP address by MAC or by port (Port based for single switch), it also can assign IP address by port for multiple switches with single DHCP option82 server. DHCP Option66 server can offer IP address of TFTP server to DHCP client for VOIP application. Optional IPv6 address resolution for DHCP service can be supported.

User friendly GUI, Auto topology drawing
The user friendly UI, innovative auto topology drawing and topology demo makes TPES-R6616XFT much easier to get hands-on. The complete CLI enables professional engineer to configure setting by command line.

Enhanced G.8032 ring, MSTP 8 MSTI; MRP ring and GVRP supported
Lantech TPES-R6616XFT features enhanced G.8032 ring which can be self-healed in less than 20ms for single ring topology protection covering multicast packets. It also supports various ring topologies that covers enhanced ring and basic ring by easy setup than others. It supports MSTP that allows RSTP over VLAN for redundant links with 8 MSTI. MRP (Media Redundancy Protocol) can be supported for industrial automation networks.

IGMPv3, GMRP, router port, static multicast forwarding and multicast Ring protection
The unique multicast protection under enhanced G.8032 ring can offer immediate self-recovery instead of waiting for IGMP table timeout. It also supports IGMPv3, GMRP, router port and static multicast forwarding binding by ports for video surveillance application.

Editable configuration file; USB port for upload/download configuration 
The configuration file of Lantech TPES-R6616XFT can be exported and edited with word processor for the other switches configuration with ease. The USB port can upload/download the configuration from/to USB dongle.

2 DI + 2DO; Factory default pin
TPES-R6616XFT provides 2DI and 2DO. When disconnection of the specific port was detected; DO will activate the signal LED to alarm. DI can integrate the sensors for events and DO will trigger the alarm while sending alert information to IP network with email and traps. The factory reset pin can restore the setting back to factory default.

Environmental monitoring for switch inside information 
The environmental monitoring can detect switch real overall temperature, total PoE load, real input voltage and current where can send the SNMP traps alert when abnormal.

EN50155, IEC60571; EN45545-2; EN50124; EN60068; EN12663, EMC06 compliance; High ESD protection
The TPES-R6616XFT also provides ±2000V EFT and ±6000V ESD contact protection, which can reduce unstable situation caused by power line and Ethernet. TPES-R6616XFT passed serious tests under extensive Industrial EMI and Safety standards. With EN45545-2 Fire & Smoke and EN50155 verification, the TPES-R6616XFT is best switch for railway on-board/track side, vehicle and mining applications. For more usage flexibilities, TPES-R6616XFT supports wide operating temperature from -40°C to 75°C.
*Future release
**Optional

Last Update : 2019-04-08
LoadingLoading ...


The purpose of Slider Kit is to gather common slideshow-like jQuery functionalities (such as news sliders, photos galleries/sliders, carousels, tabs menus)

When tracking mouse movement, you usually need to know the actual position of the mouse pointer. The event object that is passed to the handler contains some information about the mouse coordinates.

Step 1Fill in the formStep 2Completion

Mr.Greg Tsai , LANTECH COMMUNICATIONS GLOBAL, INC

USD
Insert a template
0/1500

File formats: htm, html, doc, docx, pdf, txt, jpg, gif, png. Max 3 files (10MB in total).

Total size:0

  • +

This helps to more precisely match your inquiry with potential suppliers.Use "," or "enter" to separate multiple keywords.

Please fill in all required fields.

    Recommendations

    Loading ...

    Small Order Recommendation

    Loading ...